Press Release 108/2023

Climate Hack for Steel Industry: New Process Enhances Sustainability of Pig Iron Production

Researchers of KIT and Partners Demonstrate a Process that Reduces Greenhouse Gas Emissions of Conventional Steel Production
2023_108_Klimahack fuer die Stahlindustrie_Neues Verfahren macht Roheisenherstellung nachhaltiger_1_72dpi
Integration of blast furnace, coke oven, and recycling of process gases and process heat reduces CO2 emission of steel production. (Graphics: SMS group)

Researchers of Karlsruhe Institute of Technology (KIT) and the SMS group have developed a new process to reduce CO2 emission of worldwide steel production by several hundred million tons per year. It is based on modernizing blast furnace technology with moderate investments and has already been demonstrated successfully in a pilot plant. The researchers report in Energy Advances.  (DOI: https://doi.org/10.1039/D3YA00227F)

About eight percent of worldwide CO2 emissions are produced by steel industry. “This must be changed quickly,” says Professor Olaf Deutschmann from KIT’s Institute for Chemical Technology and Polymer Chemistry (ITCP). He admits that new hydrogen technologies may open up a climate-neutral perspective in the long term. But it will take several years until a sufficient amount of green hydrogen will be available worldwide and new plants will start operation. “We are running out of time in this climate crisis and we have to take countermeasures now.” A new process developed by Deutschmann’s research team in cooperation with the SMS group, Paul Wurth Entwicklungen, and KIT’s startup omegadot has now proved to be effective also in conventional plants. “The potential is very high. We expect that backfitting existing blast furnaces with moderate investments will reduce worldwide direct CO2 emissions by two to four percent,” Deutschmann says. 

New Process Reduces Emissions and Saves Energy 

The new process departs from iron. This raw material is contained in oxidized form in ores and extracted by means of reduction, i.e. the removal of oxygen, with coke in a blast furnace. Coke does not only produce the energy required for melting, but also serves as a reducing agent in the chemical reaction. “For this special purpose, coke is produced from fossil coal in a highly energy-consuming process,” says Philipp Blanck from ITCP, who cooperated closely with the SMS group at the pilot plant that was part of the steelworks. “In our process, we recycle CO2 from the furnace gas using coke oven gas. This yields a synthesis gas with a large hydrogen fraction that can be used as a coke substitute in the blast furnace.

For backfitting an existing plant, the Cowper heaters must be modified. Then, methane and CO2 from the coke oven gas and CO2 from the blast furnace gas are converted into synthesis gas, a mix of hydrogen and carbon monoxide. This process, so-called dry reforming, requires a high temperature that is mainly taken from the process heat of the blast furnace. The synthesis gas is then blown into the blast furnace to support iron oxide reduction there. “Per ton of steel produced, significant amounts of coke can be saved. Specific CO2 emissions are reduced by up to twelve percent,” Blanck says.

Pilotanlage im Saarland, mit der das neue Verfahren zur Eisengewinnung bereits demonstriert wird. (Foto: SMS group)
Pilot plant to demonstrate the new process for iron extraction in Saarland. (Photo: SMS group)

Successful Demonstration in Cooperation with Industry Partners

The process was demonstrated and validated at Dillinger Hüttenwerke, Saarland, in cooperation with omegadot software & consulting GmbH, a startup of KIT. omegadot has developed a software for the precise simulation and visualization of the process and for supporting scale-up to an industrial plant.

The pilot plant in Dillingen is operated by the SMS group together with Dillinger Hüttenwerke and Saarstahl. Operation is aimed at producing steel with reduced CO2 emissions. “Integration of the new process in the steelworks is the first step in the transformation of steel industry,” says Gilles Kass from the Research Section of SMS group, co-author of the publication. 

Original Publication
Philipp Blanck, Gilles Kass, Klaus Peter Kinzel, Olaf Deutschmann: Dry reforming of steelworks off-gases in a pilot plant integrated into a steel mill: influence of operating parameters; Energy Advances, 2023. DOI: 10.1039/d3ya00227f  

More about the KIT Energy Center

Being “The Research University in the Helmholtz Association”, KIT creates and imparts knowledge for the society and the environment. It is the objective to make significant contributions to the global challenges in the fields of energy, mobility, and information. For this, about 10,000 employees cooperate in a broad range of disciplines in natural sciences, engineering sciences, economics, and the humanities and social sciences. KIT prepares its 22,800 students for responsible tasks in society, industry, and science by offering research-based study programs. Innovation efforts at KIT build a bridge between important scientific findings and their application for the benefit of society, economic prosperity, and the preservation of our natural basis of life. KIT is one of the German universities of excellence.

mhe, 14.12.2023
Contact:


Margarete Lehné
Chief Press Officer (acting)
Phone: +49 721 608-41105
Fax: +49 721 608-43658
presse does-not-exist.kit edu

Contact for this press release:

Dr. Martin Heidelberger
Press Officer
Phone: +49 721 608-41169
martin heidelberger does-not-exist.kit edu
The photo in the best quality available to us may be requested by
presse does-not-exist.kit edu or phone: +49 721 608-41105.